Last Disconnect Text is "destination out of order (27)"

Unanswered Question
Jan 30th, 2009
User Badges:

This voip peer is not working..


dial-peer voice 7204 voip

tone ringback alert-no-PI

description PTLS_ATL

destination-pattern 7204....

progress_ind alert enable 8

progress_ind progress enable 8

progress_ind connect enable 8

session target ipv4:10.60.200.25


What would cause that disconnect text?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Fri, 01/30/2009 - 12:25
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

take a trace on 10.60.200.25 to find out.

Anonymous (not verified) Fri, 01/30/2009 - 12:32
User Badges:


Jaime Valencia Fri, 01/30/2009 - 14:04
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

Destination is out of order. The number dialed is a working number, but the span is not active.


at least that's for a PSTN call


when coming from VOiP it's almost the same as disconnect cause 3


No route to the destination. The dialed number is in the routing plan, but there is no physical route to the destination. The most likely cause of this is that the PRI D-channel is down, or the span or WAN is not connected correctly.


I've seen this when having 2 servers one froze and got unresponsive and there is no a higher higher preference dial peer to other server


HTH


java


if this helps, please rate

Anonymous (not verified) Sat, 01/31/2009 - 20:12
User Badges:


Actions

This Discussion