cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
413
Views
0
Helpful
3
Replies

LMS 3.1 RME 4.2 Archive failure

fashour
Level 1
Level 1

Archiving fails for all devices on RME. Checking the Reports it shows that it fails due to telnet failure. In my transport protocols I have telent as first method and tftp as second. credentials are confirmed to be correct as well as the snmp settings. Am I missing something?

Thank you

3 Replies 3

Joe Clarke
Cisco Employee
Cisco Employee

What is the exact error you're seeing in the job results?

Here you go

Device Name Config

Type File Type Accessed at Description

1. 10.141.10.252 PRIMARY RUNNING Sep 29

2008

10:32:38

TELNET: Failed to establish TELNET connection to 10.141.10.252 - Cause:

Authentication failed on device 3 times.

2. 10.141.101.254 PRIMARY STARTUP Jan 27 2009

18:41:43

TELNET: Failed to establish TELNET connection to 10.141.101.254 - Cause:

Authentication failed on device 3 times.

3. 10.141.101.254 PRIMARY RUNNING Jan 27 2009

18:41:53

TELNET: Failed to establish TELNET connection to 10.141.101.254 - Cause:

Authentication failed on device 3 times.

4. 10.141.101.254 VLAN RUNNING Jan 27 2009

18:42:03

TELNET: Failed to establish TELNET connection to 10.141.101.254 - Cause:

Authentication failed on device 3 times.

These errors point to bad credentials in DCR for these devices.  Export the DCR credentials for these devices from Common Services > Device and Credentials > Device Management, then confirm that you can login to these devices from the LMS server using those credentials.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco