Media Resource issue

Unanswered Question
Jan 31st, 2009
User Badges:

<p>Hi,</p>

<p> </p>

<p>Running UCM 6.1.2 custer.</p>

<p> </p>

<p>Having 3 locations.Two locations are having local Callmanager group and other location having SRST. There are two Media Resource Groups are configured.</p>

<p> </p>

<p>SRST location and one loaction are sharing same Media Resource group with different Device Pool. In SRST location MeetMe and Ad-Hoc conference working fine but  other location it's not working(the Media Resource are local for this location).</p>

<p> </p>

<p>If i select second Media Resource Group for this location, MeetMe and Ad-Hoc conference works fine.</p>

<p> </p>

<p>Please help me out!!!</p>

<p> </p>

<p>Regards,</p>

<p> </p>

<p> </p>

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Clifford McGlamry Sat, 01/31/2009 - 10:03
User Badges:
  • Silver, 250 points or more
  • Community Spotlight Award,

    Best Publication, November 2015


In the location where things aren't working....what's there?  A CCM server?  A Router? 


Are you using software or hardware resources for conferencing....and where are these installed?


 

Jaime Valencia Sat, 01/31/2009 - 16:39
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011


check the codecs being used, SW CFB can only handle G711


HTH


Java


If this helps, please rate

krishnamurthy.mh Mon, 02/02/2009 - 06:06
User Badges:

Hi,

Using only Software conferencing bridge.

First location Publisher & 1 subscriber installed, second location 1 suscriber installed and third location SRST routers installed.

Media Resource Group is comman for Location 1 & 3. But in location 1 where the CCM are installed Conferencing is not working,but selecting other Media resource group (created for location2),conferencing will work fine.


Between the regions using G729 codec.

Regards,



Clifford McGlamry Mon, 02/02/2009 - 06:10
User Badges:
  • Silver, 250 points or more
  • Community Spotlight Award,

    Best Publication, November 2015

DO you have transcode resources configured? The software based conference bridge will not support anything but G.711. If you're running resources that are having to connect between locations via G.729 based on locations/regions settings, it won't work without transcode resources in place, and those are only done in hardware.

Ayodeji Okanlawon Mon, 02/02/2009 - 06:13
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

With SW conference bridge, you need to makesure that the region your CFB is in and the location is using G.711 beaciuse this is the only codec that is supported

Actions

This Discussion