Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
356
Views
0
Helpful
5
Replies

Media Resource issue

krishnamurthy.mh
Level 1
Level 1

‎01-31-2009 03:52 AM - edited ‎03-15-2019 03:53 PM

<p>Hi,</p>

<p> </p>

<p>Running UCM 6.1.2 custer.</p>

<p> </p>

<p>Having 3 locations.Two locations are having local Callmanager group and other location having SRST. There are two Media Resource Groups are configured.</p>

<p> </p>

<p>SRST location and one loaction are sharing same Media Resource group with different Device Pool. In SRST location MeetMe and Ad-Hoc conference working fine but  other location it's not working(the Media Resource are local for this location).</p>

<p> </p>

<p>If i select second Media Resource Group for this location, MeetMe and Ad-Hoc conference works fine.</p>

<p> </p>

<p>Please help me out!!!</p>

<p> </p>

<p>Regards,</p>

<p> </p>

<p> </p>

Labels:
0 Helpful
5 Replies 5

Clifford McGlamry
Spotlight
Spotlight

‎01-31-2009 10:03 AM

In the location where things aren't working....what's there?  A CCM server?  A Router? 

Are you using software or hardware resources for conferencing....and where are these installed?

 

0 Helpful

Jaime Valencia
Cisco Employee
Cisco Employee
In response to Clifford McGlamry

‎01-31-2009 04:39 PM

check the codecs being used, SW CFB can only handle G711

HTH

Java

If this helps, please rate

HTH

java

if this helps, please rate
0 Helpful

krishnamurthy.mh
Level 1
Level 1
In response to Clifford McGlamry

‎02-02-2009 06:06 AM

Hi,

Using only Software conferencing bridge.

First location Publisher & 1 subscriber installed, second location 1 suscriber installed and third location SRST routers installed.

Media Resource Group is comman for Location 1 & 3. But in location 1 where the CCM are installed Conferencing is not working,but selecting other Media resource group (created for location2),conferencing will work fine.

Between the regions using G729 codec.

Regards,

0 Helpful

Clifford McGlamry
Spotlight
Spotlight
In response to krishnamurthy.mh

‎02-02-2009 06:10 AM

DO you have transcode resources configured? The software based conference bridge will not support anything but G.711. If you're running resources that are having to connect between locations via G.729 based on locations/regions settings, it won't work without transcode resources in place, and those are only done in hardware.

0 Helpful

Ayodeji Okanlawon
VIP Alumni
VIP Alumni
In response to krishnamurthy.mh

‎02-02-2009 06:13 AM

With SW conference bridge, you need to makesure that the region your CFB is in and the location is using G.711 beaciuse this is the only codec that is supported

Please rate all useful posts
0 Helpful
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Customers Also Viewed These Support Documents