01-31-2009 11:45 AM - edited 03-15-2019 03:53 PM
<p>The case is:</p>
<p>Three (3) incomming lines ring at the same time (7060 ip phone, cme 7.0).</p>
<p>Only the first call is displayed.</p>
<p>Is there anyway all three incomming number to be displayed, so the secretary can select the order to answer the calls?</p>
01-31-2009 12:29 PM
How you configured the multiple lines ?
01-31-2009 06:07 PM
Can you be more specific!
02-01-2009 02:41 AM
Yes, look at my config:
The incomming lines ring fine, but in case more than one incomming calls ring at the same time, the first call called-id is displayed and she has to anser that call so the second caller-id is displayed.
She can make a blind sellection, orange buuton, but is can not make a priority selection based on the incomming number.
02-01-2009 03:27 AM
Can you please include the ephone config ?
02-01-2009 09:41 AM
Yes, Here:
ephone 2
device-security-mode none
video
mac-address 001D.A219.A5FC
ephone-template 2
max-calls-per-button 5
busy-trigger-per-button 3
username "Secretary"
fastdial 1 999999999 name xxx
speed-dial 1 381 label "FAX 381- 1760"
speed-dial 2 330 label "S.R. 330 -1760"
speed-dial 4 220 label "Building Door"
speed-dial 5 *8888 label "TTTTT Mobile"
speed-dial 6 *9999 label "XXXXX Mobile"
speed-dial 7 123456789 label "Maria Mobile"
paging-dn 1
type 7960 addon 1 7914 2 7914
button 1:21 7:100 8:102 9:101
button 10:103 11:104 12:106 13:105
button 14:107 15:108 16:109 17m30
button 18m20 19m22 20m32 21m27
button 24m31 25m25 27m51
02-01-2009 10:22 AM
Hi, what happens if you use the rocket (up/down) button when multiple calls are ringing ?
Note you can configure BACD/AA so that calls are automatically answered and put in queue. Then if you configure an ephone-hunt to take them, it will show you how many you have in queues.
02-02-2009 01:06 AM
No, we need to know the caller to give priority, which call should we answer first and which call must wait.
In case that is not possible, is there anyway to supress the dispayed incomming call?
02-02-2009 01:54 AM
There is no way. What I was suggest is that when there are multiple calls ringing, you press the the rocker button and that will show the calling numbers. I'm not sure if that will work, it doesn't on on the IPCP.
02-02-2009 01:18 PM
No cme doesn't support that.
Any other suggestions?
I believe it is an important issue.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: