CUCM version in two different part

ajkhader123 · ‎02-01-2009

Hi All,

I have downloaded CUCM software version in two different part, can any one help me getting the procedure to combain both the part,

Regards

Abdul...

Rob Huffman · ‎02-01-2009

Hi Abdul,

Here is an example;

Upgrading From Cisco Unified Communications Manager Release 6.1(1x) or higher to Release 6.1(3) by Using the UCSInstall File

Because of its size, the UCSInstall iso file, UCOS_6.1.3.1000-16.sgn.iso, comprises two parts:

•UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part1of2

•UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part2of2

Procedure

Step 1From http://www.cisco.com,')">www.cisco.com, download the two UCSInstall files.

Step 2Execute one of the following commands to reunite the two parts of the file.

NoteThe 6.1.3.1000-16 build represents a non-bootable ISO that is only useful for upgrades. You cannot use it for new installations.

a.If you have a Unix/Linux system, cut and paste the following command from this document into the CLI to combine the two parts:

cat UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part1of2 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part2of2 > UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

b.If you have a Windows system, cut and paste the following command from this document into the command prompt (cmd.exe) to combine the two parts:

COPY /B UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part1of2+UCSInstall_UCOS_6.1.3.1000-16.sgn.iso_part2of2 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

Step 3Use an md5sum utility to verify that the MD5 sum of the final file is correct.

417c262e5706103c4e75a825e1d5d902 UCSInstall_UCOS_6.1.3.1000-16.sgn.iso

From these Release Notes;

Hope this helps!

Rob