Giuseppe Larosa Mon, 02/02/2009 - 05:34
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Navinder,


you can use


sh proc cpu sorted 1min


to see what processes use more cpu


now I give a look at your sh tech


Hope to help

Giuseppe


Giuseppe Larosa Mon, 02/02/2009 - 05:45
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Navinder,


this route


ip route 0.0.0.0 0.0.0.0 FastEthernet0/1


causes the router to perform a lot of ARP activity it would be better to provide the ip address of the default gateway so that a single ARP request is enough.


there is a high memory usage from ARP process


10 0 103975180 0 103982160 126519 126518 ARP Input


I would as a start use a default static route pointing to ip addres of default gateway (there is only one possible ip address the net is a /30 so no possible errors here).


Then also the traffic volume has its importance your WAN interface is a FE but the device cannot handle 100 Mbps of traffic to/from the internet


Hope to help

Giuseppe





Actions

This Discussion