Incoming Number missing leading 0

Answered Question
Feb 2nd, 2009
User Badges:


Hi Guys,

Probablay a really easy one, but my incoming numbers being displayed on my Cisco Phones are missing the leading zero. so 01603 111111 called and phone says 1603111111 , its causing issues with call number lookup.


Many Thanks


Paul

Correct Answer by Ayodeji Okanlawon about 8 years 2 months ago

You could also use this..


voice translation-rule 2

rule 2 /\(.+\)/ /90\1/ type unknown unknown

rule 3 /\(.+\)/ /90\1/ type national national

rule 4 /\(.+\)/ /900\1/ type international international

!


voice translation-profile DDI

translate calling 2

Correct Answer by paolo bevilacqua about 8 years 2 months ago

You're welcome. Please remember to rate useful posts with the scrollbox below.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Loading.
paolo bevilacqua Mon, 02/02/2009 - 03:36
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

CM? MGCP or H.323 ?

Ayodeji Okanlawon Mon, 02/02/2009 - 04:36
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Hi,


What do you mean CME7 and MGCP...MGCP is used with cisco callmanager!!! not CCME


Can you clearify what protocol your gateway is running and what call routing agent you are using..CCM4 or 5 or 6


breakwaterit Mon, 02/02/2009 - 04:52
User Badges:


Sorry


I have a CME 7 to which BT are providing 30 IDSN channels over a E1 Serial Interface. The CME is handing all call processing.


Paul

paolo bevilacqua Mon, 02/02/2009 - 04:59
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You should be fine with the following:


voice-port x/y:15

translation-profile incoming IN


voice translation-rule 10

rule 1 // /0/ type national national

rule 2 // /00/ type international international


voice translation-profile IN

translate calling 10


breakwaterit Mon, 02/02/2009 - 05:14
User Badges:

Thanks


Absolute winner, I always get confused with translation rules.


Thanks Again


Paul

Correct Answer
paolo bevilacqua Mon, 02/02/2009 - 05:30
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You're welcome. Please remember to rate useful posts with the scrollbox below.

Correct Answer
Ayodeji Okanlawon Mon, 02/02/2009 - 05:31
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

You could also use this..


voice translation-rule 2

rule 2 /\(.+\)/ /90\1/ type unknown unknown

rule 3 /\(.+\)/ /90\1/ type national national

rule 4 /\(.+\)/ /900\1/ type international international

!


voice translation-profile DDI

translate calling 2

Actions

This Discussion