Hi,
<br />
<br />I config the cisco 831 (E x 2, FE x 4) and I do not know the DMZ setting to be correct or not.
<br />
<br />1. ISP give me /29 IP block (e.g. 201.1.1.1 - 201.1.1.7)
<br />2. I assign 201.1.1.2 to be Web server, 201.1.1.3 to be mail server
<br />3. the connection is PPPoE.
<br />4. Internal IP address is 192.168.20.0/24
<br />
<br />There are 4 FE ports. I connect
<br />
<br />Port 1 (FE) mail server
<br />port 2 (FE) web server
<br />port 3 (FE) spare
<br />port 4 (FE) Internal segment
<br />
<br />
<br />However, the internal PC cannot access Internet. how to enable the NAT on the box? any setting incorrect or missing?
<br />
<br />rdgs
<br />
<br />
<br />below is router config:
<br />
<br />
<br />Config
<br />!
<br />hostname GZ_office
<br />!
<br />interface ethernet0
<br />ip address 201.1.1.1 255.255.255.248
<br />!
<br />interface Ethernet1
<br /> no ip address
<br /> no ip unreachables
<br /> duplex auto
<br /> pppoe enable group global
<br /> pppoe-client dial-pool-number 1
<br />!
<br />!
<br />!
<br />!
<br />!
<br />interface FastEthernet1
<br /> description to mail server
<br />!
<br />interface FastEthernet2
<br /> description to web server
<br />!
<br />interface FastEthernet3
<br /> description spare
<br />!
<br />interface FastEthernet4
<br /> description to internal segment 192.168.20.0/24
<br />!
<br />interface Dialer1
<br /> ip address negotiated
<br /> ip mtu 1492
<br /> encapsulation ppp
<br /> ip tcp adjust-mss 1452
<br /> no ip mroute-cache
<br /> dialer idle-timeout 0
<br /> dialer hold-queue 100
<br /> dialer persistent
<br /> no cdp enable
<br /> ppp authentication pap chap callin
<br /> ppp pap sent-username xxxxxxx@yyyyyyyyy password 7 123456789
<br />!
<br />!
<br />!
<br />ip route 0.0.0.0 0.0.0.0 Dialer1
<br />!
<br />
<br />
