T1 PRI

Answered Question
Feb 2nd, 2009

Hi,

I check the cisco 1800 product and it support T1 PRI

http://www.cisco.com/en/US/docs/routers/access/1800/1841/software/configuration/guide/b_setup.html#wp34472

Any idea if I buy two 1800 boxes and phase out the AS530. pls advice

rdgs

I have this problem too.
0 votes
Correct Answer by Paolo Bevilacqua about 7 years 10 months ago

T1 config is the same. For most uses, the voice features will be the same.

Please remember to rate useful posts with the scrollbox below.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Paolo Bevilacqua Mon, 02/02/2009 - 05:42

It can be done, for data calls only.

Or keep a single box (28xx), less administrative work.

Paolo Bevilacqua Mon, 02/02/2009 - 06:20

For voice calls, the 1861 and the 28xx do support that with VWICx-xx-xxx.

For modem calls, you need a 2811 as minimum, with HWIC-1CE1T1-PRI and PVDM2-xxDM.

anitachoi3 Tue, 02/03/2009 - 05:11

Hi,

one more question, is the config of 2861's T1 pri the same as 5300's T1 pri config? which voice feature(s) 2861 does not support?

rdgs

Correct Answer
Paolo Bevilacqua Tue, 02/03/2009 - 05:16

T1 config is the same. For most uses, the voice features will be the same.

Please remember to rate useful posts with the scrollbox below.

Actions

This Discussion