3750 Stackwise

Answered Question
Feb 2nd, 2009
User Badges:

Hi,

I can use just 01 stackwise cable to connect 02x3750 Switches. But, If I use 02 cables to connect him, Will I have any advantage or problem ? TKS

Correct Answer by Roberto Salazar about 8 years 4 months ago

You need 2 stackwise cables if you are trying to stack the switches.


See "Create a Switch Stack from Two Two-member Stacks"


http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_example09186a00807811ad.shtml#stack1

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Joseph W. Doherty Mon, 02/02/2009 - 12:32
User Badges:
  • Super Bronze, 10000 points or more

Roberto, just wondering, from your reference, it appears 3 or more member stack will run in a "half bandwidth", no redundacy configuration if there's a stack member down or cable is missing/defective. So you're saying a 2 member stack will not function, as a stack, without both cables?

vineesh.viswanath Mon, 02/02/2009 - 14:50
User Badges:

for 2 switch, you need 1 stackwise cable .


i don't think there is any advantage in using the second one .


more than 2 , you need the last one in the stack to connecto to the first to reseble a circular queue .

Actions

This Discussion