Cat 3750E IOS upgrade

Unanswered Question
Feb 2nd, 2009

Hey guys/gals,

I have 3750E 48 TD-S that i'm trying to upgrade the IOS on to a version that supports OSPF. Current version is 12.2.35 SE5 and apparently it doesnt support OSPF. I downloaded 12.2.44 SE5, Universal, and apparently it doesnt support OSPF either.

I'm trying to nail down which version does support OSPF...

Any help would be appreciated.

Bruce

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
mahmoodmkl Mon, 02/02/2009 - 11:36

Hi

I think u need to go for the enhanced image in that train.

Thanks

Mahmood

Roberto Salazar Mon, 02/02/2009 - 11:42

Are you enabling the ip routing first? By default, the switch is in Layer 2 switching mode and IP routing is disabled. To use the Layer 3 capabilities of the switch, you must enable IP routing.

Roberto Salazar Mon, 02/02/2009 - 11:50

Ok, here is the scoop, the 3750-E have 2 possible images files called "Universal", it comes with and w/o crypto support. The features usch as IP Routing are key activated, the feature are there but you need to get the key to active the feature, which sounds like it needs to be purchased:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/software/release/12.2_46_se/configuration/note/swactivn.html')">http://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/software/release/12.2_46_se/configuration/note/swactivn.html

Actions

This Discussion