Solved: 1130AG no signal

cdennis · ‎02-02-2009

I have set up a 1130ag as an access point and the laptops (one xp and one vista) cannot find the SSID. If I manually add the SSID it works fine. The radio is enabled, the interface is up and I have tried manually switching channels without any luck. I am missing something somewhere. Any ideas?

Scott Fella · ‎02-02-2009

Under the dot11radio 0 or dot11radio 1 enter:

guest-mode

That will broadcast the ssid if your ap is autonomous.

If you have a wlc, then under the wlan ssid, enable the checkbox for broadcast.

-Scott
*** Please rate helpful posts ***

View solution in original post

Scott Fella · ‎02-02-2009

Under the dot11radio 0 or dot11radio 1 enter:

guest-mode

That will broadcast the ssid if your ap is autonomous.

If you have a wlc, then under the wlan ssid, enable the checkbox for broadcast.

-Scott
*** Please rate helpful posts ***

cdennis · ‎02-02-2009

Perfect, I went into the SSID manager and had to specifically select the SSID under "Set Beacon Mode" and then it started working. Thanks!

Leo Laohoo · ‎02-02-2009

Is the SSID Broadcase disabled by any chance?