Changing the Time stamp on Cisco AP's

Unanswered Question
Feb 2nd, 2009

In particular, 1200 series AP's

I cant find a link anywhere in the setup (using the GUI interface).

Thanks for the help.

Lonny

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Leo Laohoo Mon, 02/02/2009 - 13:57

Use the CLI:

clock timezone

clock summer-time recurring <1, 2, 3, 4 week of the month> <1, 2, 3, 4 week of the month> .

Does this help?

lonnylegrand Mon, 02/02/2009 - 14:29

Thanks Rob, that guide only talks about using the CUI. I need to know if there's a way to configure it thru the GUI.

Not big on using the CUI as most AP's are already mounted and my understanding is you need to use the console port for CUI commands, correct?

Lonny

rob.huffman Mon, 02/02/2009 - 16:06

Hey Lonny,

No worries!

Q. How do I change the date and time settings on the Cisco 1231 AP?

A. Go to the web interface (GUI), choose Services > SNTP, select Time Settings and then change the time.

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a008009483e.shtml

Hope this helps!

Rob

PS: If enabled, you can also access the AP via Telnet and ssh for cli commands :)

lonnylegrand Mon, 02/02/2009 - 14:53

Thanks Rob, that guide only talks about using the CUI. I need to know if there's a way to configure it thru the GUI.

Not big on using the CUI as most AP's are already mounted and my understanding is you need to use the console port for CUI commands, correct?

Lonny

Leo Laohoo Mon, 02/02/2009 - 16:49

If it's in Autonomous mode, you can telnet into the AP. If it's Lightweight mode, the configuration has to be done on the WLC (CLI or GUI).

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode