02-03-2009 06:50 AM
Hello,
I have been doing a CME deployment and ran into some problem with the 7914 expansion module on the receptionist's 7961 phone.
I have the following file in flash-S00105000300.sbn
I also have the following configurations:
tftp-server flash:s00105000300.sbn
!
!
!
telephony-service
load 7914 s00105000300
!
!
all configurations seem to be ok,but there is no change-the buttons are just stuck in the red color.
Anyone who's gone through this before?
What was the workaround?
Thank you!
02-03-2009 07:18 AM
Have you configure type and addon under receptionist ephone ?
02-03-2009 07:51 AM
This is the configuration:
!
!
ephone 1
!
type 7961 addon 1 7914
!
!
That is it!
02-03-2009 08:14 AM
Which IOS are you using? I'm seeing strange issues with sidecards in 12.4(20)T1.
In some case I had to force the phone to register to another ephone tag. You do this under ephone configuration, reset, set mac to a fantasy number, phone will register to next available ephone, copy all config in there.
Make sure you have auto-reg enable when doing this.
02-03-2009 08:50 AM
You may want to check your IOS against this bug: CSCsw25514
hth,
nick
02-03-2009 09:08 AM
I'm hitting this bug exactly. It is a total success killer for those wanting latest CME.
Will be fixed in 12.4(20)T and 12.4(22)T ?
02-03-2009 09:53 AM
It is fixed into two IOS releases that are currently available:
12.4(20)T2 and 12.4(22)YB. YB is CME 7.1, and T2 just came out yesterday.
hth,
nick
02-03-2009 10:15 AM
Great, wasn't able to see that from the bug info.
Thanks Nick.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: