4900M. Configuration 1GE (RJ45) + 1GE (twingig SFP)

Unanswered Question
Feb 3rd, 2009
User Badges:

hi, please advice


i need to configure 4900M switch with combination WS-X4920-GB-RJ45 + WS-X4908-10GE cards and i need to use 2x10GE onboard port + 15x1GE copper ports + 6x1GE SFP optic ports (via 3 twingig converters plug into X4908-10GE card).


Do you think it would work or not?


i can't find information about it. Data sheet contains some variety configurations but does not have configuration when it is required to use 1GE (RJ45) on one card couple with 1GE (SFP) on X4908-10GE card + twingig.


http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6021/ps9310/Data_Sheet_Cat_4900M.html


thanks in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Tue, 02/03/2009 - 08:14
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Andrey,

configuration has to be done on groups of ports that share the same asic


Switch(config)# hw-module module m port-group p

select [gigabitethernet | tengigabitethernet]


see


http://cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/46sg/configuration/guide/sw_int.html#wp1077316')">http://cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/46sg/configuration/guide/sw_int.html#wp1077316


it explains also how to see port group mappings


Hope to help

Giuseppe


Yudong Wu Tue, 02/03/2009 - 10:36
User Badges:
  • Gold, 750 points or more

Yes, it's possible. I don't think Table 2 in data sheet gives all options.

goryachev Tue, 02/03/2009 - 23:25
User Badges:

thanks so much.

one more question:

when i order chassis 4900M with WS-X4908-10GE card, does it include 8 twingig converters (CVR-X2-SFP) or i need to reorder it for special (not zero) price?

goryachev Wed, 02/04/2009 - 01:58
User Badges:

the previous question is not actual. Thanks to everybody

Actions

This Discussion