02-03-2009 06:53 AM - edited 03-06-2019 03:50 AM
hi, please advice
i need to configure 4900M switch with combination WS-X4920-GB-RJ45 + WS-X4908-10GE cards and i need to use 2x10GE onboard port + 15x1GE copper ports + 6x1GE SFP optic ports (via 3 twingig converters plug into X4908-10GE card).
Do you think it would work or not?
i can't find information about it. Data sheet contains some variety configurations but does not have configuration when it is required to use 1GE (RJ45) on one card couple with 1GE (SFP) on X4908-10GE card + twingig.
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps6021/ps9310/Data_Sheet_Cat_4900M.html
thanks in advance
02-03-2009 08:14 AM
Hello Andrey,
configuration has to be done on groups of ports that share the same asic
Switch(config)# hw-module module m port-group p
select [gigabitethernet | tengigabitethernet]
see
http://cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/46sg/configuration/guide/sw_int.html#wp1077316')">http://cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/46sg/configuration/guide/sw_int.html#wp1077316
it explains also how to see port group mappings
Hope to help
Giuseppe
02-03-2009 10:36 AM
Yes, it's possible. I don't think Table 2 in data sheet gives all options.
02-03-2009 11:25 PM
thanks so much.
one more question:
when i order chassis 4900M with WS-X4908-10GE card, does it include 8 twingig converters (CVR-X2-SFP) or i need to reorder it for special (not zero) price?
02-04-2009 01:58 AM
the previous question is not actual. Thanks to everybody
02-04-2009 07:45 AM
Just let you know. If you want to check your hardware configuration. You can use the "Dynamic configuration tool".
https://apps.cisco.com/qtc/config/jsp/configureHome.jsp
For your above question, this tool will tell you know if "converter" is included or not.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide