02-03-2009 04:08 PM - edited 03-15-2019 03:58 PM
I need to make changes to a few ephones such as username and number, but the GUI will not allow this.
Is there a way through command line interface?
Solved! Go to Solution.
02-04-2009 11:03 AM
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html
Please remember to rate useful posts with the scrollbox below.
02-03-2009 04:22 PM
Of course. CLI is what you use for professional configuration, the GUI is mainly for users to set CFA from home and things like that.
02-04-2009 09:47 AM
I figured out how to change the username for each ephone, but cannot remember how to change the User Number associated with it.
IE. Currently at 226. I want it to be 4279.
02-04-2009 10:12 AM
1. find on which DN tag the number is:
show ephone telephone 226
2. change number under said tag:
conf t
ephone-dn XX
number 4279
02-04-2009 10:40 AM
Thanks.
I was using just ephone, not ephone-dn command.
Appreciate the help.
PS. I tried to find the Command Line Interface guide for v12.4 (UC520), and cannot locate it.
If you have a link, that would be great.
thanks again.
02-04-2009 11:03 AM
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html
Please remember to rate useful posts with the scrollbox below.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: