cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
499
Views
0
Helpful
2
Replies

DMVPN and QoS implementation

tmesbah
Level 1
Level 1

Hi,

I am looking for best practice of implementing QoS on DMVPN phase 3.

Thanks

2 Replies 2

Laurent Aubert
Cisco Employee
Cisco Employee

Hi,

If you are using DMVPN for voice traffic, you can have a look to the following white paper:

http://www.cisco.com/application/pdf/en/us/guest/netsol/ns171/c649/ccmigration_09186a0080840eb4.pdf

Since 12.4T you have also per tunnel service-policy available:

http://www.cisco.com/en/US/docs/ios/security/configuration/guide/sec_per_tunnel_qos.html

But if your marking happens before the packet is routed to the tunnel interface, DSCP field is copied from the inner to the outer header so you can apply also a service-policy directly on your WAN interface as you didn't loose your marking information.

One concern is if packets get delayed for a too long time because of high congestion they might be dropped on the other end because of the anti-replay window.

HTH

Laurent.

Thanks Laurent. No, we are using DMVPN for DATA for now and we have these two requirements:

1. QoS to put FTP and Netbios copy on Best Effort with limited bandwith.

2. Critical application, like, SQL, VDI "Virtual Desktop Infrastructure", Mail "Exchange", as mission critical with Garantie bandthwith

3. create Scavenger for not desired traffic "nepstart,...."

4. QoS for Video Streaming and video conferencing on I think Priority class.

We don't have voice now "using still PBX".

Thanks

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco