02-03-2009 09:28 PM - edited 02-21-2020 04:08 PM
Hi,
<br />When I am defining in anyconnect (also ipsec client) to tunnel all networks the clients are disconnected from their internet dialer (PPPOE or L2TP) and the connection drops.
<br />
02-10-2009 01:15 PM
Configure the PPPoE Client DDR Idle-Timer on an ATM PVC Interface
To configure the PPPoE client DDR idle-timer in interface-ATM-VC configuration mode, use the following commands:
SUMMARY STEPS
1. enable
2. configure {terminal | memory | network}
3. interface atm atm-interface-number
4. pvc vpi/vci
5. pppoe-client dial-pool-number number [dial-on-demand]
6. exit
02-10-2009 08:10 PM
hi,
I am having problem in ASA SSL client.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide