Problem with L2TP dialer and anyconnect full tunnel

y_yosi · ‎02-03-2009

Hi,

<br />When I am defining in anyconnect (also ipsec client) to tunnel all networks the clients are disconnected from their internet dialer (PPPOE or L2TP) and the connection drops.

<br />

wong34539 · ‎02-10-2009

Configure the PPPoE Client DDR Idle-Timer on an ATM PVC Interface

To configure the PPPoE client DDR idle-timer in interface-ATM-VC configuration mode, use the following commands:

SUMMARY STEPS

1. enable

2. configure {terminal | memory | network}

3. interface atm atm-interface-number

4. pvc vpi/vci

5. pppoe-client dial-pool-number number [dial-on-demand]

6. exit

y_yosi · ‎02-10-2009

hi,

I am having problem in ASA SSL client.