cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
287
Views
0
Helpful
3
Replies

Cisco 1760 with SHDSL

kolawole1
Level 1
Level 1

I have a cisco 1760 router with one adsl wic and one shdsl wic (wic 1 shdsl v3).The router has detected the adsl wic but not the shdsl.I am using the following software:c1700-y7-mz.123-4.XG5.bin.I have tried several ios and used feature navigator to find ios but neither works.Here is output of sh version

Can somedy help ?

3 Replies 3

paolo bevilacqua
Hall of Fame
Hall of Fame

According to documentation:

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t7/feature/guide/gt4wire.html

You need a minimum of 12.4(2)Xa or 12.4(5) to support that hardware.

Note you also will probably need a RAM and flash upgrade to host that newer IOS.

Hi,

Thanks Using feature navigator it realised that i only need 48 MB DRAM and 16 MB FLASH to run 12.4(5) ios.

In my case do i still need an upgrade based on my sh ver ?

Check with the actual image.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco