02-04-2009 06:51 AM - edited 03-06-2019 03:51 AM
All,
Could someone point me out to some documentation or explain to me what exactly is regarded as a "link-flap" for error-disable detection ?
Is this one up/down in one second ? three up/downs in 2 seconds ? four consequetive up/down ?
Geert
Solved! Go to Solution.
02-04-2009 08:33 AM
Hey Geert,
The interface is put into the errdisabled state if it flaps more than five times in 10 seconds.
http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00806cd87b.shtml
best regards
Sebastian
02-04-2009 08:33 AM
Hey Geert,
The interface is put into the errdisabled state if it flaps more than five times in 10 seconds.
http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00806cd87b.shtml
best regards
Sebastian
02-04-2009 12:05 PM
It is often so difficult to find the correct document on the web site. I searched for over an hour for this document. tkx.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide