02-05-2009 01:53 AM - edited 07-03-2021 05:07 PM
Hi There, can any body tell me what is the traffic generated by controllers & AP to communicate with WLC. If WLC is across the WAN...what are the traffic consideration one should take care..
02-05-2009 05:32 AM
Here is a good link... hope this helps
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080901caa.shtml
02-05-2009 06:13 AM
Hey Scott,
Good find my friend! +5 points for your ongoing great help here!
Cheers!
Rob
02-05-2009 12:10 PM
HI it was really helpfull thanks but my concern is to find the bandwidth used by communication between WLC & WCS. My WCS is across the WAN & all the controllers from the branches would be joining WCS which is in Data Center across WAN..so need to have some kind of overview wht would be the bandwidth used by these communication
02-05-2009 02:32 PM
WCS uses snmp so it would be the same as if you had a network monitoring tool.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: