02-05-2009 03:38 AM - last edited on 03-25-2019 07:47 PM by ciscomoderator
Hi all
have some body configure 3rd-party sip ip phone with ccme 4.1 or later.there is no documentation available on net for such scenario.or give me idea how it can b implemented.
Thanks
Tahir
02-05-2009 05:29 AM
Hi Tahir,
This is what the minimum configuration looks like:
voice service voip
sip
registrar server
voice register global
mode cme
source-address 1.1.1.1 port 5060
max-dn X
max-pool X
voice register dn 1
number 1000
voice register pool 1
id mac XXXX.XXXX.XXXX
type
number 1 dn 1
username X password X ! Required if IP phone's address is on different subnet than SIP CME source address
You can also look at the documentation here:
hth,
nick
02-08-2009 11:34 AM
02-08-2009 12:51 PM
You need to make sure the x-lite client is actually adding an Authentication Header to the REGISTER message it sends. This looks like it would be an endpoint configuration issue.
You should see something like this:
-> REGISTER ( no authentication)
M- 401 Unauthorized
-> REGISTER (authentication)
<- 200 OK
You can try taking the 'authenticate register' message out of your voice register global configuration as well.
There also is not a DN defined on the phone. You probably want to add 'number 1 dn 1' to your voice register pool configuration.
hth,
nick
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: