02-05-2009 03:38 AM - last edited on 03-25-2019 07:47 PM by ciscomoderator
Hi all
have some body configure 3rd-party sip ip phone with ccme 4.1 or later.there is no documentation available on net for such scenario.or give me idea how it can b implemented.
Thanks
Tahir
02-05-2009 05:29 AM
Hi Tahir,
This is what the minimum configuration looks like:
voice service voip
sip
registrar server
voice register global
mode cme
source-address 1.1.1.1 port 5060
max-dn X
max-pool X
voice register dn 1
number 1000
voice register pool 1
id mac XXXX.XXXX.XXXX
type
number 1 dn 1
username X password X ! Required if IP phone's address is on different subnet than SIP CME source address
You can also look at the documentation here:
hth,
nick
02-08-2009 11:34 AM
02-08-2009 12:51 PM
You need to make sure the x-lite client is actually adding an Authentication Header to the REGISTER message it sends. This looks like it would be an endpoint configuration issue.
You should see something like this:
-> REGISTER ( no authentication)
M- 401 Unauthorized
-> REGISTER (authentication)
<- 200 OK
You can try taking the 'authenticate register' message out of your voice register global configuration as well.
There also is not a DN defined on the phone. You probably want to add 'number 1 dn 1' to your voice register pool configuration.
hth,
nick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide