Updating phone firmware - CCM 4.02

Unanswered Question
Feb 5th, 2009
User Badges:

where can I find a detailed/step-by-step doc. showing phone firmware load upgrade procedures for the CCM 4.02 cluster?

The phone types: 7940, 7941, 7960, 7961, 7936, 7906, 7914

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jaime Valencia Thu, 02/05/2009 - 10:56
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

download the .exe and run it on the TFTP servers, reset phones.


README files contains install instructions


HTH


java


if this helps, please rate

metuzuner Thu, 02/05/2009 - 11:49
User Badges:

Hi Fureya,


Following link will take you to the download page for cmterm-7940-7960-sccp.8-0-8.exe. On that page look below where is says Release Information. There you can find the readme file.


Please be aware that the link should be used as an example; pick the correct firmware version for your CM version and phone model from the actual Voice Downloads page.


http://tools.cisco.com/support/downloads/go/IPCheck.x?defAdv=N&sftAdv=N&filename=cmterm-7940-7960-sccp.8-0-8.exe&advUrl=null&defInd=N&mdfid=268437897&sftType=Skinny+Client+Control+Protocol+(SCCP)+Software&optPlat=&nodecount=7&relVer=8.0(8)&md5=f129ad7d9127bc1e94e32e04b9eff1b2&modifmdfid=268437897&imname=&hybrid=Y&imst=N&modelName=Cisco+Unified+IP+Phone+7940G&treeMdfId=278875240&treeName=Voice+and+Unified+Communications&edesignator=null&nodecount=7&fsd=&wc=N&hasfsd=N


Regards,


Mehmet

Actions

This Discussion