Voice RTP not tagged in EF ?

Unanswered Question
Feb 6th, 2009
User Badges:

Hello,

It seems that my IP Phones 7911 have their voice flow that are not tagged in EF but in DSCP 0, why ?


DSCP For Call Control CS3

DSCP For Configuration Default

DSCP For Services Default


How can I change this, I'm with a CCME.


thanks

Olivier

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Nicholas Matthews Fri, 02/06/2009 - 07:28
User Badges:
  • Red, 2250 points or more

Where are your IP phones connected?

Is it a switch?

Does that switch have MLS qos enabled? Does the port the phone is connected to have 'mls qos trust dscp' or 'mls qos trust cos'?



-nick

ogor Fri, 02/06/2009 - 07:38
User Badges:

no mls qos enabled I want to specify the IP Phone to tag the RTP in EF and the sig in AF31 but on the phone not on the routers.


Temporarely I have configure policy-map to identify with ACL my RTP and Sig trafic and to tag them but I prefer to do it internally on the IP Phone (7911)

calluknet Sun, 02/08/2009 - 13:15
User Badges:

NM-16ESW with PPWR-DCARD-16ESW - I think this integrated switch enables mls qos by default. Default means that nothing is trusted so you do need to enable trusting as you suggest.

Paolo Bevilacqua Fri, 02/06/2009 - 07:30
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Which exact IOS and phone FW ?

ogor Fri, 02/06/2009 - 07:36
User Badges:

Hi,

They are connected on a NM-16ESW with PPWR-DCARD-16ESW router card.


Please check the attahed files to see the 2 type of routers used.


Olivier






Attachment: 
calluknet Sun, 02/08/2009 - 13:12
User Badges:

How is the access layer switch configured? Are the phones directly connected to your lan? What type of switch/line cards are you using?


Worst case scenario can you use MQC to remark RTP?

Actions

This Discussion