not able to configure atm interface

Unanswered Question
Feb 6th, 2009
User Badges:

Hi, I have 2811 router with IOS

Cisco IOS Software, 2800 Software (C2800NM-IPBASE-M), Version 12.4(3i), RELEASE SOFTWARE (fc2)

I have installed 2X 1SHSDL-V3 cards into that. When configuring the SDSL card, i found that the int atm 0 command is not working. Can you please help me how can i have the interface atm on my router. Is any other command is needed to enable the atm interface?

Router-01(config)#int ?

Async Async interface

BVI Bridge-Group Virtual Interface

CDMA-Ix CDMA Ix interface

CTunnel CTunnel interface

Dialer Dialer interface

FastEthernet FastEthernet IEEE 802.3

Group-Async Async Group interface

Lex Lex interface

Loopback Loopback interface

MFR Multilink Frame Relay bundle interface

Multilink Multilink-group interface

Null Null interface

Port-channel Ethernet Channel of interfaces

Tunnel Tunnel interface

Vif PGM Multicast Host interface

Virtual-PPP Virtual PPP interface

Virtual-Template Virtual Template interface

Virtual-TokenRing Virtual TokenRing

range interface range command


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Fri, 02/06/2009 - 07:15
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi, you need IOS 12.4(5) and above for hwic-shdsl-v3.


This Discussion