Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
428
Views
0
Helpful
4
Replies

PIX 501 and PDM - drops connection

Go to solution
somerseyecenter
Level 1
Level 1

‎02-06-2009 08:21 AM - edited ‎03-06-2019 03:54 AM

Hardware: PIX-501, 16 MB RAM, CPU Am5x86 133 MHz

Cisco PIX Firewall Version 6.3(1)

Cisco PIX Device Manager Version 3.0(4)

I can log in to PDM and PDM can pull all device information but after that drops connection to the PIX. Reconnect doesn't work for me. Any idea what was missing during console PIX setup? Thanks

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
lreger
Level 1
Level 1

‎02-06-2009 09:29 AM

I had a similar problem about 2 years ago with a customer's pix. I was able to resolve it by upgrading to 6.3(5)

View solution in original post

0 Helpful
4 Replies 4

Go to solution
lreger
Level 1
Level 1

‎02-06-2009 09:29 AM

I had a similar problem about 2 years ago with a customer's pix. I was able to resolve it by upgrading to 6.3(5)

0 Helpful

Go to solution
somerseyecenter
Level 1
Level 1
In response to lreger

‎02-06-2009 09:35 AM

OK, I will try upgrading to 6.3(5)

0 Helpful

Go to solution
somerseyecenter
Level 1
Level 1
In response to somerseyecenter

‎02-06-2009 12:06 PM

After software upgrade everything start to working properly. Thanks!

0 Helpful

Go to solution
lreger
Level 1
Level 1
In response to somerseyecenter

‎02-06-2009 12:37 PM

Good to hear

0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking products for a $25 gift card