Schedule a Reload issue

Unanswered Question
Feb 6th, 2009

I am having a problem scheduling a reload

when I am done there is no reload set

I upgraded to IOS to 122-25.SEB3 and it works.

Has someone had this problem or know what could be the problem...

Cisco 3560

**************************************

Version 12.2(37)SE1

Doesn't work

Cab_1#sh clock

11:36:33.993 EST Fri Feb 6 2009

Cab_1#reload at 11:45

Reload scheduled for 11:45:00 EST Fri Feb 6 2009 (in 8 minutes) by jjhpe on vty0 (ipaddress_removed)

Proceed with reload? [confirm]

Cab_1#sh reload

No reload is scheduled.

***********************************

This works

Version 12.2(25)SEB3

Cab_2.2628#sh clock

11:46:17.357 EST Fri Feb 6 2009

Cab_2628#reload at 12:01

Reload scheduled for 12:01:00 EST Fri Feb 6 2009 (in 14 minutes)

Proceed with reload? [confirm]

Cab_2628#sh reload

Reload scheduled for 12:01:00 EST Fri Feb 6 2009 (in 14 minutes) by jjhpe on vty0 (ipaddress_removed)

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
jfeo Fri, 02/06/2009 - 08:58

Thank you I looked last night for the bug but couldn't find it.

Is there a workaround I have hundreds of these switches with that IOS

Edison Ortiz Fri, 02/06/2009 - 09:02

Sorry, there isn't a workaround - the only solution will be upgrading to an IOS which does not contain that bug which on this case is 12.2(44)SE or later.

HTH,

__

Edison.

Please rate helpful posts

Actions

This Discussion