02-06-2009 08:45 AM - edited 03-06-2019 03:54 AM
I am having a problem scheduling a reload
when I am done there is no reload set
I upgraded to IOS to 122-25.SEB3 and it works.
Has someone had this problem or know what could be the problem...
Cisco 3560
**************************************
Version 12.2(37)SE1
Doesn't work
Cab_1#sh clock
11:36:33.993 EST Fri Feb 6 2009
Cab_1#reload at 11:45
Reload scheduled for 11:45:00 EST Fri Feb 6 2009 (in 8 minutes) by jjhpe on vty0 (ipaddress_removed)
Proceed with reload? [confirm]
Cab_1#sh reload
No reload is scheduled.
***********************************
This works
Version 12.2(25)SEB3
Cab_2.2628#sh clock
11:46:17.357 EST Fri Feb 6 2009
Cab_2628#reload at 12:01
Reload scheduled for 12:01:00 EST Fri Feb 6 2009 (in 14 minutes)
Proceed with reload? [confirm]
Cab_2628#sh reload
Reload scheduled for 12:01:00 EST Fri Feb 6 2009 (in 14 minutes) by jjhpe on vty0 (ipaddress_removed)
02-06-2009 08:53 AM
Please refer to the following bug:
HTH,
__
Edison.
02-06-2009 08:58 AM
Thank you I looked last night for the bug but couldn't find it.
Is there a workaround I have hundreds of these switches with that IOS
02-06-2009 09:02 AM
Sorry, there isn't a workaround - the only solution will be upgrading to an IOS which does not contain that bug which on this case is 12.2(44)SE or later.
HTH,
__
Edison.
Please rate helpful posts
02-06-2009 09:04 AM
Thank you for your Help
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: