02-06-2009 08:45 AM - edited 03-06-2019 03:54 AM
I am having a problem scheduling a reload
when I am done there is no reload set
I upgraded to IOS to 122-25.SEB3 and it works.
Has someone had this problem or know what could be the problem...
Cisco 3560
**************************************
Version 12.2(37)SE1
Doesn't work
Cab_1#sh clock
11:36:33.993 EST Fri Feb 6 2009
Cab_1#reload at 11:45
Reload scheduled for 11:45:00 EST Fri Feb 6 2009 (in 8 minutes) by jjhpe on vty0 (ipaddress_removed)
Proceed with reload? [confirm]
Cab_1#sh reload
No reload is scheduled.
***********************************
This works
Version 12.2(25)SEB3
Cab_2.2628#sh clock
11:46:17.357 EST Fri Feb 6 2009
Cab_2628#reload at 12:01
Reload scheduled for 12:01:00 EST Fri Feb 6 2009 (in 14 minutes)
Proceed with reload? [confirm]
Cab_2628#sh reload
Reload scheduled for 12:01:00 EST Fri Feb 6 2009 (in 14 minutes) by jjhpe on vty0 (ipaddress_removed)
02-06-2009 08:53 AM
Please refer to the following bug:
HTH,
__
Edison.
02-06-2009 08:58 AM
Thank you I looked last night for the bug but couldn't find it.
Is there a workaround I have hundreds of these switches with that IOS
02-06-2009 09:02 AM
Sorry, there isn't a workaround - the only solution will be upgrading to an IOS which does not contain that bug which on this case is 12.2(44)SE or later.
HTH,
__
Edison.
Please rate helpful posts
02-06-2009 09:04 AM
Thank you for your Help
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide