02-09-2009 02:02 AM - edited 03-13-2019 06:03 PM
Hi All,
We have a running setup on Cisco Call Manager Express along with Unity module plugged into same router.
Now,the customer has purchased separate MCS hardware for Pub & Subscriber.CCM would be implemented on CCM while Unity configuration will remain on earlier CME router.
I had a concern what all we need to configure on CCM so that Unity module on router can be integrated with CCM.
regs,
aman
02-09-2009 05:21 AM
Hi Aman,
One main thing you will need is a new license to work with CCM;
Say your system came with a License like this for CME (Note the CME at the end of the part#);
Cisco Unified Communications Manager Express
12-mailbox package: SCUE-LIC-12CME=
What you will need is a License like this for CCM (Note the CCM at the end of the part#);
12-mailbox package: SCUE-LIC-12CCM=
You can download this license file here;
http://www.cisco.com/cgi-bin/tablebuild.pl/cue-netmodule
From this good doc;
Upgrading or Downgrading the Cisco Unity Express License in the Same Version
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_2/installation/guide_/upglic32.html
Here is the new config guide;
CallManager for Cisco Unity Express Configuration Example
Hope this helps!
Rob
02-18-2009 04:48 AM
Hi rob,
thanks for the URLs.We will do it & get back to you in case of issues.
regds,
aman
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: