02-09-2009 02:30 AM - edited 03-06-2019 03:55 AM
Dear All,
Can anyone please explain me the advantages of 3-Layer architecture ( Core-Distribution-Access) over 2-Layer Architecture ?
Thanks and Regards.
02-09-2009 04:29 AM
Assuming your thinking just physical hierarchal topology, it's really about scaling a network to support a number of hosts. 2 layers support (about) X squared ports, where X is number of ports per device, and 3 layers support (about) X cubed ports.
02-09-2009 08:24 AM
Hi Mangesh,
It makes you understand your Infrastructure better and against trouble shooting you would be able to know where/what you need .
HTH
DAK
02-09-2009 01:03 PM
Financially, Layer-2 Architechture "will do the job". Personally, that person needs to be take out and shot!
Technically, a Layer-3 Architechture will allow easy trouble-shooting by separating or segmenting the network based on function and topology.
If it's a small site, a collapsed Layer-2 (Core & Distribution, Access or Core, Distribution & Access) could be used.
02-22-2009 05:36 AM
The CDA model (Cisco's 3 Layer Hiearchical model) is typically used in a medium to large network - although, it can also be used in a small network, it just might not be financially feasible depending on the company's budget. The 3 layer architecture will also help allocate resources better throughout the network. For instance, the core can do its job and ensure high speed packet delivery, the distribution switches can focus on things like routing between VLANs (or subnets) and QoS, while the access layer can focus on delivering data to the end users. This model also allows much better scalability than the two layer model.
The collapsed core architecture (2 layer) is mostly used in small networks. It may be used for perhaps, a small branch office. It takes the above CDA model and collapses it into 2 layers. Either the core/distribution and access model or the core and distribution/access model. Depending on the size of the network, it might be a wise financial decision to take this route instead of the 3 Layer Architecture. Although, from a technical standpoint, the 3 layer model is the way to go.
Here is a link that may provide some more insight:
http://www.cisco.com/global/AP/switching/deploy_manage.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide