cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
309
Views
0
Helpful
2
Replies

EM Error

mymite060708
Level 1
Level 1

CM 4.1-3

When the user selects Services, the Extension mobility application is displayed. When the users selects this after about 2 minutes "host not found appears. I have checked the service URL etc and all is correct

any ideas?

thanks

2 Replies 2

david-lima
Level 4
Level 4

Hi, check this:

The IP phone displays the "Host not found" error when the Services button is pressed.

Solution: Choose System > Enterprise Parameters. Check the URL services, and if it is set to the CallManager Server name, replace the CallManager Server name with the IP address as shown in this example.

Example: http://10.10.10.1/CCMCIP/getservicesmenu.asp , where 10.10.10.1 is the Cisco CallManager IP address.

Stop/start the TFTP, Internet Information Server (IIS), and Computer Telephony Integration (CTI) services and reboot the phones for the change to take affect.

For this good guide:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080093e72.shtml#host

Hope this help

David

like I said. When I press the services key the option is presented. Its when I select the service I get "Host not found"

and I have already set the ip in enterprise params and checked the service URL

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: