02-09-2009 04:18 AM
user tracking is not displaying nortel ip phones.
the phones are attached to catalayst 4500 switches running in native ios mode
the ports are configured as
interface FastEthernet2/8
switchport access vlan xxx
switchport mode access
switchport voice vlan xxx
switchport port-security maximum 5
switchport port-security
switchport port-security aging time 10
qos trust dscp
no snmp trap link-status
spanning-tree portfast
The p.c's attached via the ip phones are being discovered
Solved! Go to Solution.
02-09-2009 09:24 AM
change the settings in
NMSROOT/campus/etc/cwsi/ut.properties and set UTGetVlansWithUserPorts=0
Run a new Data Collection and when it has finished start a new UT aquisition.
02-09-2009 09:24 AM
change the settings in
NMSROOT/campus/etc/cwsi/ut.properties and set UTGetVlansWithUserPorts=0
Run a new Data Collection and when it has finished start a new UT aquisition.
02-10-2009 03:38 AM
This has worked perfectly.
Much appreciated.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide