02-09-2009 04:18 AM
user tracking is not displaying nortel ip phones.
the phones are attached to catalayst 4500 switches running in native ios mode
the ports are configured as
interface FastEthernet2/8
switchport access vlan xxx
switchport mode access
switchport voice vlan xxx
switchport port-security maximum 5
switchport port-security
switchport port-security aging time 10
qos trust dscp
no snmp trap link-status
spanning-tree portfast
The p.c's attached via the ip phones are being discovered
Solved! Go to Solution.
02-09-2009 09:24 AM
change the settings in
NMSROOT/campus/etc/cwsi/ut.properties and set UTGetVlansWithUserPorts=0
Run a new Data Collection and when it has finished start a new UT aquisition.
02-09-2009 09:24 AM
change the settings in
NMSROOT/campus/etc/cwsi/ut.properties and set UTGetVlansWithUserPorts=0
Run a new Data Collection and when it has finished start a new UT aquisition.
02-10-2009 03:38 AM
This has worked perfectly.
Much appreciated.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: