ASA: Active/Stdby: Stateful Failover: IOS upgrade query

Unanswered Question
Feb 9th, 2009
User Badges:
  • Gold, 750 points or more

Hi All,


I have 2ASAs in Active/standby with stateful failover mode. Planning to upgrade IOS. Wanted to disconnect Standby from network first and upgrade the IOS. Now, the inside interface config..


********************************

interface GigabitEthernet1/0

nameif inside

security-level 100

ip address 192.168.20.6 255.255.255.192 standby 192.168.20.7

**************************

When the standby unit is disconnected and connect the laptop directly with Xover cable, if I assign my laptop with any ip in the inside interface subnet range, will it work or due to standby ip config, any issue will be there..?


TIA

MS



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
apdatasoft Mon, 02/09/2009 - 23:21
User Badges:

Hi,

there shouldn't be any issue. I did the same.


Regards

AP

mvsheik123 Tue, 02/10/2009 - 08:14
User Badges:
  • Gold, 750 points or more

Thank you for the reply. It worked.


MS

Actions

This Discussion