cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
434
Views
0
Helpful
2
Replies

Missing images on Web pages

vpcmailadmin
Level 1
Level 1

We just started using the ASA 5510 with the CSC module. We have a development Webserver in DMZ. From within the LAN we see a lot of broken images when accessing web pages on the development web server in the DMZ and Web pages outside our network. The missing images issue occur more frequently with Internet Explorer and less often with Firefox or Chrome. This problem also occurs when we VPN into our network and access any web setver!

In case this is related - The CSC CPU Utilization is between 60 and 100% a lot of the time.

Any pointers on where I should look?

Thanks.

Jay

2 Replies 2

vmoopeung
Level 5
Level 5

Check if webvpn is enabled. If so try disabling it.

config-webvpn# cache

config-webvpn-cache# disable

Please go to (on ASDM) Config > VPN > WebVPN > Cache, and uncheck the

"Enable Cache". Then reload the ASA.

If webvpn cache is disabled but the page still doesn't load, then something contained in that page is not supported via clientless webvpn. Because of the complexity of the webpage, not every web content is supported.

2. If #1 does not help, please keep the cache disabled and try proxy-bypass:

config-webvpn# proxy-bypass interface port 20001 target

http://xyz.com rewrite link

Thanks for the reply...

We are using IPSEC VPN.

Also this problem is pronounced inside the firewall when accessing web pages on the internet or the DMZ!

Jay

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card