cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
339
Views
0
Helpful
2
Replies

Spanning Multiple VLANS between sites

ramzi-kotob
Level 1
Level 1

I am looking at ways to span 4 vlans currently configured at one site to another site.

The VLANs are configred on a 6509 which is connected to 3845 with a T3 connection to the remote site. The remote site where I need to span the VLANs to has a 6506.

I will also need to take in consideration the ISP equipment. At the main site, the T3 in my 3845 terminate onto the ISP 7206VXR

at the remote site My 6506 connects to th ISP switch, so I believe there are additional ISP equipment in the mix.

What is the best way to span these VLANs. It is required to replicate VMs at the remote site.

Thank you for your help

2 Replies 2

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello Ramzi,

L2TPv3 can carry Vlan based 802.1Q subifs over an IPv4 network.

It should be supported on both routers

see

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtl2tpv3.html

and for vlan based L2tpv3

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtl2tpv3.html#wp1046193

Hope to help

Giuseppe

Giuseppe,

Thank you for the reply. i will try this the next scheduled maintenance.

Thank you,

Ramzi

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco