C3750-IPSERVICES-M question

Answered Question
Feb 10th, 2009
User Badges:

I have a switch with the C3750-IPSERVICES-M image on it. I thought this would allow me to do layer 3 stuff but I can't seem to enable eigrp routing. What image should I use if I need routing capabilities?


Thanks

Correct Answer by Jon Marshall about 8 years 5 months ago

Roland


IPServices should support full EIGRP. What happens when you configure


3750(config)# router eigrp 1


You have enabled ip routing on the switch ? ie.


3750(config)# ip routing


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jon Marshall Tue, 02/10/2009 - 13:01
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Roland


IPServices should support full EIGRP. What happens when you configure


3750(config)# router eigrp 1


You have enabled ip routing on the switch ? ie.


3750(config)# ip routing


Jon

rshum Tue, 02/10/2009 - 13:09
User Badges:

Crud...I forgot to enable ip routing! Thanks Jon!

Jon Marshall Tue, 02/10/2009 - 14:48
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Roland


No problem. If i had 5 points for every time i forgot this sort of thing i'd be up there with Rob :-)


Jon

Actions

This Discussion