02-10-2009 12:55 PM - edited 03-06-2019 03:58 AM
I have a switch with the C3750-IPSERVICES-M image on it. I thought this would allow me to do layer 3 stuff but I can't seem to enable eigrp routing. What image should I use if I need routing capabilities?
Thanks
Solved! Go to Solution.
02-10-2009 01:01 PM
Roland
IPServices should support full EIGRP. What happens when you configure
3750(config)# router eigrp 1
You have enabled ip routing on the switch ? ie.
3750(config)# ip routing
Jon
02-10-2009 01:01 PM
Roland
IPServices should support full EIGRP. What happens when you configure
3750(config)# router eigrp 1
You have enabled ip routing on the switch ? ie.
3750(config)# ip routing
Jon
02-10-2009 01:09 PM
Crud...I forgot to enable ip routing! Thanks Jon!
02-10-2009 02:48 PM
Roland
No problem. If i had 5 points for every time i forgot this sort of thing i'd be up there with Rob :-)
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide