I'm trying to configure MAC Auth against ACS. All documentation I found says it works..however EAPOL must be disabled so the switch can consider it as agentless host, and initiates the MAC authentication bypass process.
However, I can't seem to be able to disable EAPOL on WinXP..therefore can't get MAC bypass to work.
dot1x-ev:dot1x_mgr_send_eapol: Sending out EAPOL packet on FastEthernet1/0/34
EAPOL pak dump Tx
EAPOL Version: 0x2 type: 0x0 length: 0x0004
EAP code: 0x3 id: 0x1 length: 0x0004
dot1x-packet:dot1x_auth_txCannedSuccess: EAPOL packet sent out for the default authenticator