02-11-2009 06:49 AM
When doing an api dump of data for several 2950 devices, it shows the number of ports defined on a device. The number of ports that have an associated IfIndex is 0. Why would a physical port not have an associated IfIndex?
02-11-2009 09:07 AM
Please post some sample data as well as the command you're running to get the data.
02-11-2009 11:46 AM
Here is the command:
cwcli export inventory -u XXX -p XXX -view ""/RME@sa26esoccisco04 - All Devices
Here is a sample of the output, notice that PortNumber 5 and 6 have Cisco_Port entries have a IfInstanceID after that there are no IfInstanceID's until PortNumber 15.
-
-
InstanceName>StackPort1
-
-
-
-
-
-
-
-
-
-
-
-
02-11-2009 11:59 AM
I can't reproduce. What does the Detailed Device Report look like for this switch?
02-11-2009 12:07 PM
02-11-2009 12:18 PM
If you run the cwcli output for this one device alone, do the results contain all of the IfInstanceIDs?
02-11-2009 12:26 PM
No, same results as above.
02-11-2009 12:40 PM
I don't see any problems, and since I believe you're running RME 4.0.6, all known data discrepancy bugs of this nature should be fixed. I recommend you open a TAC service request so some database analysis can be done.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide