cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
426
Views
0
Helpful
2
Replies

ANI server problem - LMS 3.1

stesarova
Level 1
Level 1

I have installed LMS 3.1 with campus manager v.5.1.0. It isn't possible to show topology services. I recieve the message in pop-up window:

--------------------------------------------------

Cannot connect to ANI server: ANIServer6.0-mf00ms19

Probable Cause

Unknown Error..

Recommended Action

Verify that ANIServer6.0-mf00ms19 is running and restart Campus Manager

---------------------------------------------

List of processes contains row:

ANIServer Running with busy flag

After restart this service is the same situation.

I have reinstalled it several times, but result is still the same.

Does anybody know what is going wrong?

thanks sarka

2 Replies 2

Joe Clarke
Cisco Employee
Cisco Employee

Make sure TCP ports 42342 and 43242 are open between client and server. That is, you must be able to telnet to these two ports from the client to the server, and not get an error or timeout.

Hi, I have tested both port and they are accessible. so than I have removed and reinstalled whole application and this was the most simply solution.

Thank you.

Sarka

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: