02-12-2009 03:42 AM - edited 03-15-2019 04:10 PM
Hi Guys,
I have a remote site working off CCM 4.2 and the users have the main number AAAA as line 2 on all the phones in their office and their extensions as line 1. Therefore incoming calls ring all phones(line2) during normal operation and i need to replicate this setup in SRST mode. Below is the relevant config:
call-manager-fallback
max-conferences 8 gain -6
transfer-system full-consult
limit-dn 7940 2
timeouts interdigit 4
ip source-address 192.168.X.X port 2000
max-ephones 24
max-dn 30 dual-line
system message primary Oops link is gone
dialplan-pattern 1 25.. extension-length 4 extension-pattern 25..
alias 1 AAAA to abcd
time-format 24
date-format dd-mm-yy
I have tried using the alias command but this only maps the main number to one extension and not all the phones.IOS is currently c2800nm-ipvoicek9-mz.124-22.T.bin .
Any ideas ??
02-15-2009 02:39 PM
Any takers ??
02-16-2009 02:00 AM
Check the SRST set up, In there may be the default setting to control the number of lines which can register when in SRST mode- maybe the default is 1 for all phones. Don`t forget that in theory all phones which have a SRST reference point can register on a first come first served basis- this includes lines as well so normally to stop phones, lines getting all the license the number of lines are restricted
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide