02-12-2009 05:31 AM - edited 07-03-2021 05:09 PM
hi All,
I am trying to configure the domain name in wlc but i am not geeting the option.
If i checked the sh cdp nei on switch where my LWAPP connected....its showing...
puna-wpi-ap-1g.cisco.com....
where i think cisco.com is default domain.
So pls give me the appropriate solution to configure the domain in WLC.
Waiting for the reply ASAP.....
Thanks & Regards,
RAJU
02-12-2009 07:45 AM
What version code are you running? I seem to recall that in early versions of code this cannot be changed.
02-13-2009 04:13 AM
Version 4.2.112.0
02-13-2009 07:16 AM
I think you need to be on 5.0+ to modify the domain name.
Can anyone else confirm that?
02-16-2009 02:46 PM
4.2 shouldn't have had an issue with the domain name, I believe that started in 5.0, and was fixed in 5.2. If the AP is getting DHCP, then the domain name should be set from the DHCP option. If you are using static, you would need to use a command to gain access to the CLI of the AP to set it, but it will not persist through a rebot as you cannot write to the memory of an LWAPP AP.
HTH,
Steve
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide