WLSE, WPA v1 and v2

Unanswered Question
Feb 12th, 2009

Using

- WLSE 1130 Release 2.15.2

- AP1250 IOS 12.4(10b)XXX

Hi all,

When creating template with WLSE, we have to choose between WPA version 1 or 2, which generate IOS :

- authentication key-management wpa version 1

or

- authentication key-management wpa version 2

With Access point older than 1250, there is no consequence, Only the "Encryption settings" will be significant, and so we can use WPAv1 AND v2 simultaneously (AES CCMP+TKIP).

With an 1250 access point, In the SECURITY / SSID, for a SSID we have to choose between

- WPA

- WPA version 1

- WPA version 2

Th first one will permit to use v1 AND v2 simultaneously, whereas the second choice limit to version 1 and the third choice limit to version 2.

The problem is : In WLSE, we only have TWO CHOICES : v1 or v2 exclusively ! and not the only "WPA" choice ...

How can we specify in the template to configure the AP to use version 1 AND version 2 ?

Thanks.

SD.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

 

 

Trending Topics - Security & Network