SCCP Admin state

Answered Question

I am trying to get a IOS conference bridge setup and can't seem to get it registered. One thing I noticed was when I do a "show sccp" I receive this


SCCP Admin State: DOWN

Gateway IP Address: 10.91.89.21, Port Number: 2000

IP Precedence: 5

User Masked Codec list: None

Call Manager: 10.47.3.13, Port Number: 2000

Priority: N/A, Version: 4.1, Identifier: 1

Call Manager: 10.47.3.12, Port Number: 2000

Priority: N/A, Version: 4.1, Identifier: 2

Call Manager: 10.47.3.11, Port Number: 2000

Priority: N/A, Version: 4.1, Identifier: 3


Here is my gateway config.


sccp local Loopback0

sccp ccm 10.XX.3.13 identifier 1 version 4.1

sccp ccm 10.XX.3.12 identifier 2 version 4.1

sccp ccm 10.XX.3.11 identifier 3 version 4.1

!

sccp ccm group 1

associate ccm 1 priority 1

associate ccm 2 priority 2

associate ccm 3 priority 3

associate profile 1 register CAL-CONF

switchback method immediate

!

dspfarm profile 1 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 3

associate application SCCP

Correct Answer by Jaime Valencia about 8 years 3 months ago

do a no sccp / sccp, confirm the device name in CUCM


HTH


java


if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.

Actions

This Discussion